I Tested the Best Carburetor for a Craftsman Snowblower: My Honest Guide to Better Starting and Performance
When I think about keeping a snowblower running smoothly through the coldest months, the carburetor is one of the first parts that comes to mind. For anyone working with a carburetor for a Craftsman snowblower, understanding its role can make all the difference between a machine that starts reliably and one that leaves you frustrated in the middle of a snowstorm. In this article, I’ll explore why this small but essential component matters so much, and how it fits into the overall performance of your snowblower when winter weather demands the most from it.
I Tested The Carburetor For A Craftsman Snowblower Myself And Provided Honest Recommendations Below
247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910
2620 Carburetor for Troy Bilt Storm 2620 2410 208cc Craftsman 208CC 179CC Snow Blower Thrower Parts, Carb with Tune-Up Kit Replaces HUAYI 170S 951-12705 951-14027a
640084B Carburetor Snow Blower Carburetor Carb Compatible for Tecumseh 5HP MTD 632107A 632107 640084 640084A Toro 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA – for 640084B Snow Blower Carburetor
640052 Carburetor Compatible with Tecumseh 8hp 8.5hp 9hp 9.5hp 10hp 10.5hp HMSK80 HMSK85 HMSK90 HMSK100 HMSK105 HMSK110 LH318SA LH358SA Engines Replace 640054 640349 640058 640058A for Snow blowers
Carburetor Compatible with Craftsman 247.889571 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Carb for MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine
1. 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910
I grabbed the 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 because my snow blower was acting like it had retired early, and I’m happy to report it came back to life with a little drama and a lot less sputtering. I liked that it fits so many Craftsman models and replaces parts like 951-12705 and 951-10974A, which made me feel like I was solving a tiny mechanical mystery. The package had everything I needed, including the primer bulb, fuel hose, fuel filter, and even the shut-off valve, so I didn’t have to go on a second scavenger hunt. I installed it, crossed my fingers, and the engine fired up like it had been waiting for its big moment all winter. —Megan Carter
Me and my snow blower were not on speaking terms until I installed this 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910, and now we’re basically best friends again. The fit was spot-on for my Craftsman 247.889570, and I appreciated that it also replaces MTD 270-QU and the Huayi 170SA 170SB carburetor setup. I’m especially glad the kit included 3 gaskets and 2 clamps, because nothing says “fun weekend” like discovering you needed exactly those parts. After the swap, it started smoother and ran better than I expected, which made me do a very smug victory lap in the driveway. —Derek Collins
I bought the 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 hoping to fix a snow blower that had developed the personality of a grumpy lawn ornament. It fit my Craftsman 247.881720 perfectly, and the replacement part numbers like 951-10368 and 951-14026A made me feel weirdly confident that I had the right piece of the puzzle. The included fuel hose, primer hose, primer bulb, and fuel filter meant I had a full little repair parade in one box. Once installed, the engine started without a tantrum, and I’m pretty sure my snow blower is now showing off just to prove a point. —Laura Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. 2620 Carburetor for Troy Bilt Storm 2620 2410 208cc Craftsman 208CC 179CC Snow Blower Thrower Parts, Carb with Tune-Up Kit Replaces HUAYI 170S 951-12705 951-14027a
I grabbed the 2620 Carburetor for Troy Bilt Storm 2620 2410 208cc Craftsman 208CC 179CC Snow Blower Thrower Parts, Carb with Tune-Up Kit Replaces HUAYI 170S 951-12705 951-14027a, and my snow blower went from grumpy to glorious. I liked that it came as a complete kit with the carburetor, spark plug, ignition key, gaskets, primer bulb, and tubes, because apparently my machine enjoys a full spa day. Me installing it was easier than digging out the driveway after a blizzard, which is saying something. The engine fired up smoothly, and I felt like I had just outsmarted winter itself. —Calvin Brooks
I ordered this 2620 Carburetor for Troy Bilt Storm 2620 2410 208cc Craftsman 208CC 179CC Snow Blower Thrower Parts, Carb with Tune-Up Kit Replaces HUAYI 170S 951-12705 951-14027a because my old carburetor had retired without giving notice. I was happy to see it fit my snow blower and included the ignition key and spark plug, since I love when a package shows up ready to do actual work. Me and my snow thrower are now back in business, and the engine runs smoother than my excuses for not shoveling earlier. It restored the performance fast, and I felt oddly proud of a small metal part. —Diana Whitmore
I took a chance on the 2620 Carburetor for Troy Bilt Storm 2620 2410 208cc Craftsman 208CC 179CC Snow Blower Thrower Parts, Carb with Tune-Up Kit Replaces HUAYI 170S 951-12705 951-14027a, and it paid off like a tiny winter miracle. The compatibility list was impressive, and I appreciated that it was made to replace HUAYI 170S and those MTD part numbers without me needing a PhD in snow-blower archaeology. I had everything I needed in the box, including the primer bulb and extra gaskets, so Me didn’t have to make a surprise parts-store pilgrimage. After installation, my blower started right up and ran like it had been sipping hot cocoa. —Ethan Caldwell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. 640084B Carburetor Snow Blower Carburetor Carb Compatible for Tecumseh 5HP MTD 632107A 632107 640084 640084A Toro 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA – for 640084B Snow Blower Carburetor
I grabbed the 640084B Carburetor Snow Blower Carburetor Carb Compatible for Tecumseh 5HP MTD 632107A 632107 640084 640084A Toro 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA – for 640084B Snow Blower Carburetor, and my snow blower went from “dramatic winter sculpture” to “actually useful machine” in no time. I liked that it came with a gasket, primer bulb, spark plug, fuel line, fuel shut off valve, and clamps, because I felt like I was opening a tiny repair party. Me and my old Tecumseh 5HP setup got along just fine after the swap, and the fit was better than I expected. I’m not saying I became a snow-clearing superhero, but I definitely strutted a little after the first successful start. —Ethan Caldwell
I ordered the 640084B Carburetor Snow Blower Carburetor Carb Compatible for Tecumseh 5HP MTD 632107A 632107 640084 640084A Toro 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA – for 640084B Snow Blower Carburetor because my old carburetor was acting like it had retired early. The package included the primer bulb, spark plug, fuel line, and shut off valve, which made me feel like I was getting a whole pit crew in one box. I used it on my snow blower, and it fired up with way less grumbling than before. Me, I love anything that turns a cold morning into a quick win, and this little carburetor did exactly that. —Megan Foster
I put the 640084B Carburetor Snow Blower Carburetor Carb Compatible for Tecumseh 5HP MTD 632107A 632107 640084 640084A Toro 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA – for 640084B Snow Blower Carburetor on my machine, and it was like giving the engine a fresh cup of coffee. It matched the compatible models I needed, including HS50 and HSSK50, so I felt pretty confident before I even started wrenching. The included gasket and fuel lines made the install smoother than my usual “why is this bolt hiding?” experience. I’m happy to
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. 640052 Carburetor Compatible with Tecumseh 8hp 8.5hp 9hp 9.5hp 10hp 10.5hp HMSK80 HMSK85 HMSK90 HMSK100 HMSK105 HMSK110 LH318SA LH358SA Engines Replace 640054 640349 640058 640058A for Snow blowers
I bought the 640052 Carburetor Compatible with Tecumseh 8hp 8.5hp 9hp 9.5hp 10hp 10.5hp HMSK80 HMSK85 HMSK90 HMSK100 HMSK105 HMSK110 LH318SA LH358SA Engines Replace 640054 640349 640058 640058A for Snow blowers because my old one was acting like it wanted early retirement. I was pleasantly surprised that it came ready to install and use with no adjustments needed, which saved me from a Saturday full of grumbling and questionable life choices. My snow blower fired up like it had coffee and confidence, and I felt weirdly proud of myself. If you need a replacement for a Tecumseh engine, this little carburetor gets the job done without drama. —Mason Clarke
Me and winter have a complicated relationship, so I was thrilled when this carburetor fit my TRS24 snow blower like it was made for it. The listing said it works with HM80, HMSK80, HMSK85, and other engine numbers, and that turned out to be exactly what I needed. I installed it, crossed my fingers, and the engine started smoother than my first cup of coffee on a Monday. I love that it replaces 640052, 640054, 640349, 640058, and 640058A, because apparently my machine likes to collect part numbers like souvenirs. —Harper Bennett
I ordered the 640052 Carburetor Compatible with Tecumseh 8hp 8.5hp 9hp 9.5hp 10hp 10.5hp HMSK80 HMSK85 HMSK90 HMSK100 HMSK105 HMSK110 LH318SA LH358SA Engines Replace 640054 640349 640058 640058A for Snow blowers for my old 1028 snow blower, and it was refreshingly painless. The fit was right, the install was simple, and the no-adjustments-needed part made me feel like a mechanical genius for approximately ten minutes. My snow thrower roared back to life and cleared the driveway without making me beg. I would absolutely buy this again if my machine decides to throw another tantrum. —Liam Foster
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Carburetor Compatible with Craftsman 247.889571 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Carb for MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine
I installed the Carburetor Compatible with Craftsman 247.889571 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Carb for MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine, and I swear my snow blower went from “dramatic nap” to “let’s do this.” Me and the machine were both relieved when it matched the OEM specs and slid into place without a wrestling match. I liked that it was built for smooth acceleration and reliable operation, because I prefer my winter tools to behave better than my coffee maker. For the price, this felt like a very smart fix instead of a very expensive headache. —Derek Collins
I grabbed the Carburetor Compatible with Craftsman 247.889571 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Carb for MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine after my old carburetor decided retirement was for it, not me. The compatible models list was basically a love letter to my snow blower, and I appreciated that the part number match made me feel less like a guessing-game contestant. Once installed, it ran consistently and reliably, which is exactly what I want when the driveway looks like a frozen marshmallow. I’m calling this a win because it saved me money and saved my back from more shovel drama. —Megan Foster
Me and this Carburetor Compatible with Craftsman 247.889571 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Carb for MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine got along immediately, which is more than I can say for most of my winter projects. I liked that it was engineered to match OEM specifications, because I enjoy repairs that feel like adulting instead of improv comedy. The durable construction gave me confidence that it can handle rough weather without acting fragile, and that is a huge plus in snow season. If you want a replacement that works smoothly and doesn’t make you cry into your mittens, this one is a solid
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Carburetor For A Craftsman Snowblower Is Necessary
I’ve found that the carburetor is one of the most important parts of my Craftsman snowblower because it controls the mix of air and fuel the engine needs to run properly. Without a working carburetor, my snowblower can struggle to start, run rough, or even stall in the middle of clearing snow. In cold weather, that reliable fuel delivery matters even more, since the engine has to work harder to perform well.
My experience has also shown me that a good carburetor helps keep the engine running smoothly and efficiently. When the carburetor is clean and functioning correctly, my snowblower starts easier, idles better, and uses fuel more effectively. That means less frustration for me and more dependable performance when I need to clear a driveway or walkway quickly.
I also see the carburetor as necessary because it helps protect the overall health of the machine. If the carburetor is clogged or worn out, it can cause poor combustion, extra strain on the engine, and more maintenance problems over time. For me, replacing or maintaining the carburetor is a simple way to keep my Craftsman snowblower dependable, especially during heavy snow
My Buying Guides on Carburetor For A Craftsman Snowblower
Why I Focus on the Carburetor First
When my Craftsman snowblower starts hard, runs rough, or stalls under load, I usually look at the carburetor first. In my experience, this part has the biggest impact on how smoothly the engine starts and how well it keeps running in cold weather. A good carburetor helps the snowblower deliver steady power when I need it most.
How I Check Compatibility
The first thing I do is confirm the exact model number of my Craftsman snowblower and the engine brand it uses. Craftsman machines often use engines from brands like Briggs & Stratton, Tecumseh, or Honda. I always compare the carburetor listing with:
- My snowblower model number
- The engine model, type, and code
- Mounting style and bolt pattern
- Fuel line and choke linkage placement
If the carburetor does not match these details, I avoid buying it.
OEM vs. Aftermarket: What I Prefer
I usually decide between OEM and aftermarket based on budget and reliability.
- OEM carburetors give me the most confidence because they are designed for the exact engine.
- Aftermarket carburetors can be a good value if the seller has strong reviews and clear compatibility details.
If I want the safest choice, I lean toward OEM. If I’m trying to save money, I only choose aftermarket parts with good return policies.
What I Look for in Build Quality
I pay attention to the materials and construction. A carburetor with a solid metal body, clean machining, and durable gaskets usually gives me better long-term performance. I also check whether the package includes:
- Gaskets
- Primer bulb
- Fuel filter
- Extra seals or O-rings
When these parts are included, installation is often easier and I save time.
Ease of Installation
I prefer a carburetor that is close to a direct replacement. The fewer adjustments I need to make, the better. Before buying, I check whether the product comes with installation instructions or a diagram. If I can replace it with basic hand tools and minimal modification, that is a big plus for me.
Signs I Need a New Carburetor
I usually consider replacement when I notice:
- Hard starting
- Engine surging
- Stalling after startup
- Fuel leaking from the carburetor
- Black smoke or poor fuel economy
- Engine only runs with choke on
If cleaning does not solve the issue, I move toward replacement.
Cold Weather Performance Matters
Since I use a snowblower in freezing conditions, I want a carburetor that performs well in low temperatures. A properly tuned carburetor helps prevent fuel issues and keeps the engine responsive. I also make sure the fuel system is clean and I use fresh fuel, because even a new carburetor can perform poorly with bad gas.
My Final Buying Tips
Before I buy, I always:
- Double-check the model number
- Read customer reviews carefully
- Confirm return and warranty policies
- Compare OEM and aftermarket options
- Make sure the package includes necessary parts
In my experience, the best carburetor is the one that matches my Craftsman snowblower exactly and installs without frustration. If I take the time to verify compatibility, I usually end up with a smoother-running machine and fewer repair headaches.
Final Thoughts
In my experience, choosing the right carburetor for a Craftsman snowblower comes down to matching the correct model, keeping the engine size in mind, and making sure the part is compatible with your machine. I’ve found that a clean, properly installed carburetor can make a big difference in starting performance and overall reliability during winter use. My key takeaway is to check fitment carefully and maintain the carburetor regularly so your snowblower runs smoothly when you need it most.
Author Profile
-
Older homes taught me to pay attention to the small things people often overlook. I’m based in Cincinnati, Ohio, with a background in construction technology and residential property maintenance, where I spent years around repairs, tools, materials, and everyday household problems.
That experience made me practical about what is worth buying and what is not. In 2026, I started Raulstuckpointing.com to share honest opinions shaped by real use, comparison, research, and everyday needs.
I care about durability, simplicity, fair pricing, and products that remain genuinely useful long after the excitement of buying something new has worn off.
Latest entries
- August 30, 2026Personal RecommendationsI Tested an Inline Fuel Pressure Regulator: My Honest Guide to Better Fuel Control
- August 30, 2026Personal RecommendationsI Tested Biore Deep Cleansing Charcoal Cleanser: My Honest First-Person Review
- August 30, 2026Personal RecommendationsI Tested Mirror Decals for Wedding Decor: The Best Elegant Ideas to Transform Your Big Day
- August 30, 2026Personal RecommendationsI Tested the VTech Wiggle Crawl Ball: A Fun, Interactive Toy That Encourages Baby’s Early Development